Checkups
Air Conditioning
- Check and adjust thermostat.
- Check the condenser coil to determine if it needs cleaning.
- Safety check all wiring and connections to controls and electrical connections.
- Check blower belt wear, tension & adjust.
- Check voltage & amperage draw on all motors with meter.
- Visually inspect compressor and check amp draw.
- Replace air filter or clean reusable type filter.
- Install gauges & check operating pressures.
- Check refrigerant (freon) level and advise if adjustments necessary.
- Check condensate drain and pan then advise of any discrepancies.
- Check evaporator coil and advise if dirty or if it needs cleaning.
Heating
- Check and adjust thermostat.
- Check to make sure that the indoor & outdoor units turn on.
- Replace the air filter or clean if reusable type.
- Check bearings & lubricate blower motor if needed.
- Check electrical connections for tightness.
- Check electric heaters with amp probe and voltage during heating inspection.
- Install gauges & check operating pressures.
- Check refrigerant (freon) level.
- Check crankcase heater if compressor has one installed.
- Check defrost controls.
- Check reversing valve operation.
- Check the coil temperature.
Manufacturers recommend that you have your unit cleaned every 6 months. It extends the life of the unit and insures it will run at optimal level. Our winter and summer maintenance plan is a 2 visit service for $199.
